JLC3DP 3D Printing & CNC Service Starts at $1,Get $60 for New Users:
https://jlc3dp.com/?from=nbr
Creality Ender 3 V3 Plus and K2 Max: https://shareasale.com/r.cfm?b=2015992&u=3447554&m=124834&urllink=&afftrack=
On Amazon: https://amzn.to/4aLTLr6
My Patreon: https://www.patreon.com/NathanBuildsRobots
PRUSA MMU: http://www.prusa3d.com/#a_aid=NBR
Today’s Watch: Casio Classic G-Shock GWM5610-1 https://amzn.to/3wKVIG3
My Store: https://nathansellsrobots.com
Discord Channel: https://discord.gg/pZW7femQaJ
The links in this description may be affiliate or tracking links. I may earn a commission on sales made through these links.
Thanks to JLCPCB for sponsoring this episode.
Thanks to Creality for sending this printer for review.
Creality Ender 3 V3 Plus
0:00 Intro
3:05 Creality Print OrcaSlicer
4:40 Compared to the smaller Ender 3 V3
6:37 Filament and Wire Path
7:33 Core XWhy
7:58 Early Firmware Underextrusion
10:05 Hotend and Extruder
11:04 Differences from Ender 3 V3
15:18 Speed Benchy Closeups
20:00 Someone else do the rest of these Im bored
source
Core XZ makes more sense when implemented with two towers with independant up and down movements connected via actuators like a Delta printer.
My s1 plus had all sorts of bed issues. Had.. I put rails on the y and what a game changer. It had a wobble left to right. Also I thought the bed was warped. It wasn't.. when the rollers passed the frame bolts it was causing the bed to tilt up. Linier rails for y on plus printers change everything. Also got a glass bed.
I expected a better technical review from Nathan who builds robots.
What is an actual acceleration you tested that worked producing quality prints?
What was a max actual extrusion rate (PLA, PETG, other) ?
Presence of the vertical artifacts?
Max bed temperature?
Issue with under extrusion is funny since ALL printers should be fine tuned before actual reviews (except for Bambu with auto-tune?).
Nathan, please do better technical reviews. This review is on the same level as 12 year old girl does on another channel – powers , up, prints => good š …..
Please stop saying the bed printer hit you head, you mentioned this like 10 times.
Thank you for the effort, please do better!
If your filament is under extruding, why not do the flow calibration? That's not an issue with the printer. As long as the extruder isn't skipping that will fix your issue. So the real issue is that the filament profile isn't dialed in well.
BUT, if we are looking at the printer from the end user perspective then Creality's own filament profiles need to be correct. That is a definite issue.
Hi, I am looking at this printer because i want to print tall props. you mean this still has Z banding issue ? Iām hoping it will solve the issue
Too much drama. If you get bopped on the head it is not the machine's fault.
How does this compare to the Ender 3 V3 SE?
I can't find the slicer at all online, the 5.3 on github doesn't have the profile for V3 plus, do you have any link or file in your usb?
The flow is proportional to the print plastic, it is tunable for each spool and for each type / brand. I am not sure it is a function of the machine ?
As of this date, Microcenter is running a massive discount on the regular Ender3 v3 .. I got mine for 279…so I guess this plus verssion is the reason why. I mainly got it because they are klipper based machines, I assume I'll eventually be able to take full control of it software wise…and it's kind of a bargain for the all the included parts.
Very nice review! thanks.
Hey man, does the quality get better if you turn down the speed to a normal speed? Or should i put more money into it and buy the k2 plus?
How wide is it with the filament on
About that plate hitting your hand… why not using it via wi-fi. Only thing I use the display for is to retract filament when I'm changing spools…
What's the filament you used for Benchy? It's sliced for HyperPLA!
"#CrealityK2Plus"
"#CrealityK2Plus"
My only comment is that it's a bit ratterly, compared to the k1c
You kept talking about the size of bed slingers, but I did not hear the size of prints this printer makes. I may have missed it, if so, sorry. Ok. i saw it at 5:20. Great video btw.
Nice review
An idea to solve the screen is maybe print a bracket to move the screen to the side of the bed with an ribbon cable extension.
The Neptune 4 Max has no problem with a speed benchy but does it at 20 minutes (you really need to check layer height and number of walls for a proper comparison). the acceleration is only 8000 but this will print more than twice the speed of the CR M4.
I have this printer and my god it is LOUD. The squeaking at slow speeds is headache inducing.
Have it next to the A1 and P1P. Needed it for the size but straight lined walls are cleaner on the A1 and P1P. Probably because of the wobbly head of the V3 plus. Any change we can change the rods for carbon to make it stiffer like on the P1P?
Very disappointed that no fan was thrown over the balcony and replaced by a 4x larger Noctua inserted by force through a nibbler-hacked hole…
But, to be fair, within a few minutes we saw drilling into the chassis to relocate the spool š
So there's that !
Very thorough video mate. šš¦šŗš
DONT BOTHER trying to get the K2, even if you do, you would still have to wait until september to get it š No one should wait that long… And chatting to the staff in online chat at creality is liking pulling hens teeth, they told me repeatedle to use google or here is the page, go look at it…
They seem to be stuck in the era of 3D printers being for tinkerers who enjoy tuning flow rates and tightening all the screws. Times have changed thanks to Bambu, and it needs to be assembled and tuned properly out of the box from day 1.
2:36 "He didn't write his name on here, that seems like a missed opportunity" – At the same time, there's a huge raised pod in the middle of the print that says "3D PRINTER TEST by Marian Trpkos". – Am I missing an inside joke here?
they could solve the bed blade issues by putting a long metal tab on the left of the bed. most users are right handed and the screen is on the right side of the printer
How do we mod existing printers with K1C E3V3 series Unicorn nozzle. I would like to thinker with that. I replaced the hotend on my CR-10 SE before but was thinking if i upgrade it unicorn nozzle now there is no blob of death problem anymore
I have to ask if I heard you correctly, you use the 4 kg bin as a bed pan or does that mean something different in the USA ?
Have Creality claimed to have written this new version of Creality print from scratch like they claimed they wrote the first version, but was yet another fork of Cura?
The Benchy gets its name from being a benchmark of QUALITY print.
I don't see the point of the speed Benchy as you can't really determine the quality.
Surely people should be trying to print the perfect Benchy as fast as possible
If creality makes the bed lighter it may lead to warping issues or it would be a very expensive BED slinger.
If the printer profile isnāt in the slicer, did you just edit the bed size in the slicer? Purchased this printer end of week last week and expecting it to arrive end of the week
Writing it on the print wasn't missed: 3D PRINTER TEST by MariĆ”n TrpkoÅ” is what I can see at 2:43
My understanding is the filament run out sensor only detects a change in state so you might not need filament in there at all and or be able to leave it disconnected. I'd love to know the answer for sure. Also, I'm excited about this printer and I want to buy it but I think I should wait maybe 6 months for software and publicly available profiles and tweaks to catch up.
thanks Nathan, very honest review
The under extrusion on the cheater test print reminds me of VWs diesel-gate situation.
Replacing the bed carriage and heat bed with a carbon fiber plate would speed it up a good amount
209 hours on it and other than the noisy stepper driver at slower speeds it has been great.
That thing must be huge to get your head through it. Lol
does anyone know if a even larger version of the Ender 3 V3 is planned by creality? I mean something like 420mm x 420mm which what seems to be a common print bed size as other manufacturers show?
You ruined the print quality by moving a 1kg spool on top
This massively increases vibrations of the frame
Doing a review of a new printer and you already had to make mods to it, hmm
would love to try out creality prints 5 but no support for cr-10 smart pro or my little ender 3 v2
Looking forward the one and only printer from Nathan in a few years!
Great video! Looking forward to the Mmu3 video. Someone really needs to make a better solution to hold all the filament spools though.
Any reason why I'd buy it instead of SV08?